JUMO EM Series Operating Instructions

15
3 Installation
A
Design 10, 15, 21, 60, 65:
only use in pressureless medium.
H
Ensure that the temperature probe (2) is completely submerged in the medium
because otherwise, greater switching point deviations will occur.
For connection types 20, 21 and 22, the temperature probe is fixed in the
sheath with the clamping piece ( 1 ).
(1)
(2)

JUMO EM Series Specifications

General

Housing Material	Plastic
Temperature Range	-50 to 400°C
Display	LCD
Power Supply	24 V AC/DC
Output	Relay, Analog
Input	Analog
Control Mode	PID, On/Off