JUMO EM Series Operating Instructions

5
1 Introduction
1.1 Typographical conventions
1.1.1 Warning signs
1.1.2 Indicative signs
abc
1
Footnote
Footnotes are comments that refer to specific parts of the text. Footnotes
consist of two parts:
A marker in the text and the foot note text itself.
The markers in the text are arranged as continuous superscript numbers.
The footnote text is located at the end of the page, in a typeface 2 degrees
smaller than the main text, and is preceded by a superscript number.
✱ Handling instructions
This symbol indicates that an action to be performed is described.
The individual steps are indicated by asterisks, for example:
✱ Opening the case
V
Danger
This symbol is used when there may be danger to personnel if the instruc-
tions are ignored or not followed correctly!
A
Caution
This symbol is used where there may be damage to equipment if the instruc-
tions are disregarded or not followed accurately!
H
Note
This symbol is used to draw your special attention to a remark.
v
Reference
This symbol refers to additional information in other chapters or sections.

JUMO EM Series Specifications

General

Housing Material	Plastic
Temperature Range	-50 to 400°C
Display	LCD
Power Supply	24 V AC/DC
Output	Relay, Analog
Input	Analog
Control Mode	PID, On/Off