3 Mounting
12
3.4 Permissible operating conditions at the pocket
3.4.1 Pockets U, US and UH
3.4.1.1 Protection tube in steel U and US
Material: Tube: St 35.8 I
Screw-in nipple: 9 SMnPb.28 K
Weld-in nipple: 16 Mo 3
3.4.1.2 Protection tube in steel U and US
Material of tube and nipple: X 6 CrNiMoTi 17 122
3.4.1.3 Protection tube in brass U
Material of tube and nipple: brass (CuZn)
3.4.1.4 Protection tube in brass UH
Material of tube and nipple: brass (CuZn)
A
The values below refer to the maximum loading on the mounting concerned.
The maximum pressure that can be sealed depends on the mounting condi-
tions and may be lower.
Temperature Tube diameter
8 x 0.75 mm
or taper
10 x 0.75 mm 15 x 0.75 mm
max. permissible pressure
100°C89bar 72bar 48
150°C83bar 67bar 45
100°C92bar 74bar 50
150°C88bar 71bar 48
100°C50bar 40bar 27
150°C48bar 39bar 26
110°C16bar
*