JUMO EMf-80 Series User Manual

16
5 Resetting the STB thermostat
5.1 Resetting the STB
After the temperature has dropped by approx. 10°C of the scale span below
the set limit (danger temperature), the snap-action switch can be reset.
5.1.1 Version for central fixing
✱
Unscrew the cap nut (1).
✱
Push down the reset button (2) until
the snap-action switch is reset.
➩
Chapter 5.1.2 "Version with fixing bracket", page 17.
Screw the cap nut (1) back into position.
( 1 )
( 2 )
( 1 )

JUMO EMf-80 Series Specifications

General

Brand	JUMO
Model	EMf-80 Series
Category	Thermostat
Language	English