Jung Home User Manual

Behaviour after a mains voltage failure
All settings and time programs are retained. Any missed switching times are not ap-
plied later. The load output or the system insert outputs are switched off, provided the
parameter "Switching status after mains voltage returns" is set to its default setting.
If the device was not previously added to a Bluetooth Mesh network (project) by
means of the JUNG HOME app, it will switch to pairing mode for two minutes after
the mains voltage returns and the status LED will flash slowly at a regular interval in
blue.
Power failure shorter than power reserve (min. 4 hours)
– Time and date are up to date
– The following time programs are performed normally again
Power failure longer than power reserve (min. 4 hours)
– The LEDs flash in blue three times repeatedly until the time is automatically
updated when connecting with the app
– The time programs are not executed as long as the time is not up to date
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
6 / 26
32405203 24.02.2023
J0082405203

Jung Home Specifications

General

Type	Switch
Current Rating	10 A
Frequency	50 Hz
Protection Class	IP20
Material	Plastic
Color	White
Voltage	230V