5.10 Cleaning
Z
Cleaning tasks may only take place in the designated locations, which adhere to the
stipulations of the country of use.
5.10.1 Cleaning the truck
CAUTION!
Fire hazard
Do not use flammable liquids to clean the industrial truck.
u
Disconnect the battery before starting cleaning work.
u
Carry out all necessary safety measures to prevent sparking before cleaning (e.g.
by short-circuiting).
CAUTION!
Risk of component damage when cleaning the truck
Cleaning with a pressure washer can result in malfunctions due to humidity.
u
Cover all electronic system assemblies (controllers, sensors, motors etc.) before
cleaning the truck with a pressure washer.
u
Do not hold the jet of the pressure washer by the marked points to avoid damaging
them (see page 30).
u
Do not clean the truck with pressurised water.
NOTICE
Risk of damage when cleaning the truck with a high-pressure cleaner
Cleaning with a high-pressure cleaner can cause discolouration or other damage on
coated or painted surfaces.
u
Do not clean the truck with hot water or steam jets.
u
Do clean the truck using acidic or aggressive cleaning agents such as insect
removers.
u
Do not clean the truck with insufficiently diluted cleaning agents.
u
Before using a cleaning agent, read the manufacturer's instructions. Test an
inconspicuous or concealed part of the coated or painted truck surface for
potential reactions to the cleaning agent.
u
Thoroughly rinse off any road salt before cleaning the truck.
u
The counterweight of the truck should ideally be cleaned using cold water and a
clean, soft cotton cloth.
162
10.20 en-GB
To Next Page
Loading...
Need help?
General
