161
03.13 EN
F Industrial Truck Maintenance
1 Operational Safety and Environmental Protection
The checks and servicing operations contained in this chapter must be performed in
accordance with the maintenance checklist service intervals.
WARNING!
Risk of accidents and component damage
Any modification to the truck, in particular the safety mechanisms, is prohibited.
Exception: Owners should only make changes or have changes made to powered
industrial trucks if the truck manufacturer is no longer operating in the field and there
is no successor to the business; owners must however:
– Ensure that the changes to be made are planned, tested and performed by a
specialist engineer in industrial trucks taking safety into account.
– keep permanent graphic records of the plans, tests and completion of the changes
– carry out and have authorised the respective changes to the capacity data plates,
decals and stickers as well as the operator and service manuals.
– attach permanent and clearly visible marking to the truck indicating the types of
changes made, the date of the changes and the name and address of the
organisation responsible for the work.
NOTE
Only original spare parts are subject to the manufacturer's quality control. To ensure
safe and reliable operation, use only the manufacturer's spare parts.
Z On completion of inspection and service work, carry out the operations listed in the
“Recommissioning the truck after cleaning or maintenance work” section (see
"Restoring the truck to service after maintenance and repairs" on page 190).
To Next Page
Loading...
Need help?
General
