201
03.13 EN
Chassis and Superstructure W A B C
1 Check chassis and screw connections for damage. t
2 Check doors and/or covers. t
3 Check labels are legible and complete. t
4 Check attachment and setting function of the driver's seat. t
5 Check condition of the driver’s seat. t
6 Check attachment of the counterweight. t
7 Check mast attachment / mounting. t
8 Check trailer coupling or tow mechanism stop. t
9
Check overhead guard and / or cab are secure and check for
damage.
t
10 Check operator mat and steps are non-slip and damage-free. t
11 Test driver's seat restraint system and check for damage. t
Hydraulic Operations W A B C
1
Test "hydraulic" controls and make sure the labels are present,
legible and complete.
t
2
Test hydraulic controls and check they are assigned to the correct
functions.
t
3
Check cylinders and piston rods for damage and leaks, and make
sure they are secure.
t
4 Test hose guide and check for damage. t
5
Check settings and wear levels of slide pieces and stops and adjust
the slide pieces if necessary.
t
6 Check load chain setting and tension if necessary. t
7 Check load chain lubrication and lubricate if necessary. t
8
Check lateral clearance of the mast connections and the fork
carriage.
t
9
Visually inspect the mast rollers and check contact surface wear
level.
t
10
Check running surfaces of the mast for wear and damage, and
lubricate if necessary.
t
11 Test hydraulic system. t
12 Replace hydraulic oil filter, ventilation/discharge filter. kt
13
Check cylinders, hydraulic ports, lines and hoses for leaks and
damage.
t
14
Check that hydraulic ports, hose and pipe lines are secure, check for
leaks and damage.
t
15 Test emergency lowering system. t
16 Check hydraulic oil level and top up if necessary. t
17 Test relief valve and adjust if necessary. t
18 Replace hydraulic oil. kt
19 Check forks or load handler for wear and damage. t
20 Check tilt cylinders and mounting. t
To Next Page
Loading...
Need help?
General
