To Next Page

To Previous Page

1003.GB

E 16

5 Keyboard (CANCODE) (o)

The operator keyboard is composed of 10 nu-

meric keys, a Set key and an o-key.

The green LED in key 1 indicates that the drive

programme was switched on with key 1.

The o-key indicates operating conditions by a

red/green LED.

It has the following functions:

– Code lock function (setting the truck into oper-

ation).

– Setting the travel and battery parameters, only in conjunction with the indicator in-

strument (CANDIS (o)).

The o-key has top priority and reset the truck from any condition to the basic condi-

tion without modifying any settings.

5.1 Code lock

After entering the correct code, the truck is ready for operation. It is possible to assign

an individual code to every truck, operator or even operator group.

When delivered from the factory, the operator code (factory setting 2-5-8-0) is indicat-

ed on a removable sticker.

Change the master and operator codes when setting the truck into operation for the

first time! (refer to section 5.4).

1 2 3

4 5 6

7 8 9

Set