20 Archer 2 Rugged Handheld Owner’s Manual
(tactical) mode. Refer to Chapter 3 for instructions.
Turning the Screen O Automatically
You can set up the display backlight to turn off after set
intervals. Tap on the top title bar from any screen and select
the battery icon from the list of applications that drops
down.
Alternately, go to the Backlight control panel, Start >
Settings > System > Backlight. Near the bottom of the screen
it says “Adjust Power Settings to conserve power.” Select the
hyperlink power (see the previous screen shot).
The Power control panel is shown. Select Advanced from
the horizontal scrolling menu near the top of the screen.
For battery and external power select how long the screen
stays on when it is not in use. Shorter times save battery
power.
To Next Page
Loading...