Ch 4 Bluetooth Wireless Communication 47
a. If the device has an assigned passcode, enter the
number and press Next.
b. If a passcode is required but has not been assigned,
enter an alphanumeric passcode between 1 and 16
characters in length. Press Next.
c. If a passcode is not required, leave the box blank
and press Next.
Note: If you are unsure whether or not the device
requires a passcode and if one has already been
assigned to the device, see the user documentation
that came with the device.
5. This process should connect you to the desired device.
6. Bluetooth settings can be adjusted as needed.
Serial Device (COM) Control Panel
To set up a Bluetooth COM port, follow these steps:
1. Select the COM Port, GPS, RFID option from the
Bluetooth dialog box. The following Bluetooth COM
conguration screen is shown. Select Discover Devices.
To Next Page
Loading...