EasyManua.ls Logo

Juniper Archer 2 - Flashlight Functionality

Juniper Archer 2
129 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 Archer 2 Rugged Handheld Owner’s Manual
Green LED on the left (associated with notications):
When the operating system has something to notify you
of, this LED behaves accordingly. For example, if you turn
GPS on the green LED blinks periodically.
Blue LED on the left (associated with shift functions):
Solid: When you press the shift key, the blue LED lights up
and stays on until another key is pressed (unless the shift
function is locked by pressing the shift key twice). If the
shift function is locked, the blue LED stays on until the shift
key is pressed again.
Only one LED is on at a time. The blue and green LEDs are in
the same location on the left. They are user programmable
through application software.
Flashlight
Geo units have a ashlight located underneath the camera
window in the back of the Archer 2.
The ashlight gadget must be on the Home screen in
order to use it. Tap on the icon once to turn on the brightest
illumination. Tap the gadget again for medium brightness,
and a third time to turn it off.
Note: This is also the camera ash.

Table of Contents