Juniper Archer 2 - Connecting to a Wi-Fi Network

50 Archer 2 Rugged Handheld Owner’s Manual
Wi-Fi Wireless Networking
The Archer 2 has built-in Wi-Fi wireless networking to
connect to the Internet or a work network.
Connecting to a Wi-Fi Network
To use Wi-Fi, you need to be in range of a Wi-Fi access
point to make a connection. To actively look for a network
connection complete the following steps:
1. From the Home screen, turn Wi-Fi on by tapping the
Wi-Fi gadget . The Archer 2 automatically starts
scanning the area for available Wi-Fi networks. (If this
gadget is not on the Home screen, go to the Start
screen and select Getting Started. Select Set up Wi-Fi or
go to Start > Settings > Connections > Wireless
Manager.)
2. Tap-hold the Wi-Fi Icon to go to the Wi-Fi control panel.
When the handheld completes the scan, a list of