EasyManua.ls Logo

Juniper Archer 2 - Compass Gadget and Navigation Settings

Juniper Archer 2
129 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ch 6 GPS/GNSS 57
Compass Gadget Functions
Compass gadget is turned off
Waypoint tool (tap it to mark a waypoint)
No GPS x
Arrow keys show your current heading or bearing
This ag indicates that you are close to the waypoint.
Information about how many feet away you are, the
elevation, and degrees is also shown.
Navigation Settings
You can also enter a known waypoint. Tap and hold the
compass gadget to see the following dialogue box:
Enter the desired latitude and longitude (WGS84) using one
of these formats:
DD MM SS.SSSS
DD MM.MMMMMM
DD.DDDDDDDD
DD = degrees of arc, one to three digits, no leading zeros.
MM = minutes of arc. SS = seconds of arc. Set the
hemisphere with the N/S, E/W radio buttons.

Table of Contents