Ch 8 3G Data Modem 73
dust when the battery door is not installed.
4. An image on the battery compartment label shows the
correct location and orientation for the mini SIM card.
Pull out the SIM card tray. Place the card onto the tray
and push the tray in until it catches.
To remove the mini SIM card, pull the tray open and
remove the card. Push the empty tray in until it catches.
5. Replace the battery pack and attach the battery door.
6. Power on the Archer 2.
Note: If the modem was on before shutting the Archer 2
down to insert the mini SIM card, you are prompted to
congure the data connection when you reboot. See
the instructions on the following pages.
To Next Page
Loading...