Policy Management show Commands ! 137
Chapter 5: Monitoring Policy Management
! queue, traffic class, bound to—Queue and traffic class bound to the
specified interface
" Queue length—Number of bytes in queue
" Forwarded packets, bytes—Total number of packets and bytes
forwarded by this interface
" Dropped committed packets, bytes—Total number of committed
packets and bytes dropped by this interface
" Dropped conformed packets, bytes—Total number of conformed
packets and bytes dropped by this interface
" Dropped exceeded packets, bytes—Total number of exceeded packets
and bytes dropped by this interface
! MPLS policy—Type (input, output) and name of policy
! classifier-group—Name of a CLACL attached to the interface and number of
entry
" rate-limit-profile—Name of profile
" Committed—Number of packets and bytes conforming to the
committed access rate
" Conformed—Number of packets and bytes that exceed the committed
access rate but conform to the peak access rate
" Exceeded—Number of packets and bytes exceeding the peak access
rate
! Example
host1#show mpls l2transport interface
FastEthernet9/0.1
routed to 222.9.1.3 on base LSP tun mpls:lsp-de090100-24-37
group-id 2 vc-id 900001 mtu 1500
State UP
In Label 48 on stack
0 pkts, 0 hcPkts, 0 octets
0 hcOctets, 0 errors, 0 discardPkts
Out Label 49 on tun mpls:lsp-de090100-24-37
0 pkts, 0 hcPkts, 0 octets
0 hcOctets, 0 errors, 0 discardPkts
queue 0: traffic class best-effort, bound to atm-vc ATM1/0.1
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
MPLS policy input mplsInputPolicy
classifier-group claclWst50 entry 1
0 packets, 0 bytes
rate-limit-profile rlp
committed: 0 packets, 0 bytes, action: transmit
conformed: 0 packets, 0 bytes, action: transmit
exceeded: 0 packets, 0 bytes, action drop
MPLS policy output mplsOutputPolicy
classifier-group claclWst75 entry 1
0 packets, 0 bytes
rate-limit-profile rlp
To Next Page
Loading...
Need help?
General
