EasyManuals Logo

Juniper E320 User Manual

Juniper E320
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #154 background imageLoading...
Page #154 background image
JUNOSe 7.2.x Policy Management Configuration Guide
138 ! Policy Management show Commands
committed: 0 packets, 0 bytes, action: transmit
conformed: 0 packets, 0 bytes, action: transmit
exceeded: 0 packets, 0 bytes, action: drop
show policy-list
! Use to display information about policy lists.
! Field descriptions—Fields displayed vary depending on the type of policy and
the rules assigned to the policy:
! Policy—Name of the policy list.
! Administrative state—For SNMP use; state is enabled when the policy list is
created. Users modifying the policy list commands via telnet see the state
as disabled. Modifications of a policy are not applied to an interface until
the administrative state is first disabled and then reenabled.
! Reference count—Number of attachments to interfaces or profiles.
! Referenced by interfaces—List of interfaces to which policy is attached;
indicates whether the attachment is at input or output of interface.
! Referenced by profiles—List of profiles to which policy is attached;
indicates whether the attachment is at input, secondary-input, or output of
interface created by the profile.
! Referenced by merge policies—List of merged policies.
! Referenced by component policies—List of component policies.
! Classifier control list—Name of the classifier control list containing policy
rules and the precedence assigned to the classifier control list.
! Statistics—Enabled, disabled
! Rule types are:
" filter—Filter policy action
" exception http-redirect—HTTP redirect policy action
" forward—Forward policy action
" next-interface—Next-interface policy action
" next-hop—Next-hop policy action
" rate-limit-profile—Rate-limit-profile policy action
" color—Color of a packet; green, yellow, or red
" traffic-class—Traffic class in a policy list
" log—Log policy action
" mark tos—ToS byte in the IP header to a specified value
" mark DS field—DS field value in the IP header to a specified value
" mark TC precedence—Traffic class value in the IPv6 header to a
specified value
" mark EXP—Value assigned to EXP bits action

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper E320 and is the answer not in the manual?

Juniper E320 Specifications

General IconGeneral
BrandJuniper
ModelE320
CategoryNetwork Router
LanguageEnglish

Related product manuals