Juniper E320

Merging Policies ! 59
Chapter 2: Creating Policies
Policy Table
------ -----
IP Policy p1
Administrative state: enable
Reference count: 2
Classifier control list: C2, precedence 10
filter
Classifier control list: C1, precedence 90
forward
Virtual-router: default
List:
next-hop 10.1.1.1, order 100, rule 2 (active)
Referenced by interfaces:
None
Referenced by profiles:
None
Referenced by merge policies:
mpl_5
mpl_8
IP Policy p2
Administrative state: enable
Reference count: 1
Classifier control list: C3, precedence 10
filter
Classifier control list: C1, precedence 90
forward
Virtual-router: default
List:
next-hop 20.1.1.1, order 100, rule 3 (active)
Classifier control list: *, precedence 1000
forward
Referenced by interfaces:
None
Referenced by profiles:
None
Referenced by merge policies:
mpl_5
IP Policy p3
Administrative state: enable
Reference count: 1
Classifier control list: C1, precedence 80
color yellow
Classifier control list: C4, precedence 900
color red
Referenced by interfaces:
None
Referenced by profiles:
None
Referenced by merge policies:
mpl_8
IP Policy mpl_5