5. Add a password to the root administration user account.
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
6. (Optional) Configure the name of the PTX10001-36MR. If the name includes spaces, enclose the name in quotation
marks (“ ”).
[edit]
root@# set system host-name host-name
7. Configure the default gateway.
[edit]
root@# set routing-options static route 0.0.0.0/0 next-hop address
8. Configure the IP address and prefix length for the management interface.
[edit]
root@# set interfaces re0:mgmt-0 unit 0 family inet address address/prefix-length
9. (Optional) Configure more specific static routes to remote prefixes with access to the management port, if you prefer
that these prefixes not use the default route.
[edit]
root@# set routing-options static route remote-prefix next-hop destination-ip retain no-readvertise
10. Enable the SSH service.
[edit]
root@# set system services ssh root-login allow
11. Commit the configuration to activate it on the device.
[edit]
root@# commit
Safety Warnings Summary
This is a summary of safety warnings. For a complete list of warnings, including translations, see the PTX10001-36MR
Packet Transport Router Hardware Guide.
12
To Next Page
Loading...
