To Next Page
R
Rachel Bailey DVMJul 25, 2025
What to do if the Juniper QFX5100-48S RE /var partition is full?
- LLauren MartinJul 25, 2025
If the /var partition on your Juniper Switch RE is full, you should clean up the system file storage space on the switch.
What to do if the Juniper QFX5100-48S RE /var partition is full?
If the /var partition on your Juniper Switch RE is full, you should clean up the system file storage space on the switch.
General| Model | QFX5100-48S |
|---|---|
| Form Factor | 1U |
| Switching Capacity | 1.44 Tbps |
| Power Supply | AC or DC |
| Jumbo Frames | Up to 9216 bytes |
| Ports | 48x 10GbE SFP+ and 6x 40GbE QSFP+ |
| Operating Temperature | 0 to 40 °C |
| Operating Relative Humidity | 5% to 90% non-condensing |
| MAC Address Table Size | 288, 000 |
| Input Voltage | 100 to 240 VAC |
| Storage Temperature | -40 to 70 °C |
| Humidity | 5% to 95% non-condensing |
