Need help?Do you have a question about the Juniper QFX5100 and is the answer not in the manual?
General| Model | QFX5100 |
|---|---|
| Category | Switch |
| Power Supply | Dual, hot-swappable |
| Rack Units | 1U |
| Junos OS | Junos OS |
| Form Factor | Fixed |
| Management Ports | 1x RJ-45 |
| Other Ports | 1 x USB port |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40° to 158° F (-40° to 70° C) |
| Humidity | 5% to 90% non-condensing |
| Power Consumption | Varies by model |
| AC Input Voltage | 100-240 VAC |
| AC Input Frequency | 50 to 60 Hz |
| Maximum Power Consumption | 400W |
| Mean Time Between Failures (MTBF) | 200, 000 hours |
| Ports | 48x 10GbE SFP+ and 6x 40GbE QSFP+ |
Details the hardware specifications and models of the QFX5100 switch.
Lists and describes various QFX5100 switch product SKUs and configurations.
Describes the components and LEDs on the management panel of QFX5100 switches.
Details the port panel layout and features of the QFX5100-24Q switch.
Details the port panel layout and expansion module bays of the QFX5100-24Q-AA.
Describes interface support for QSFP+, SFP+, and DAC cables on QFX5100.
Details specifications for SFP, SFP+, and QSFP+ transceivers used in QFX Series devices.
Provides specifications for SFP+ passive and active direct attach copper cables.
Details specifications for SFP+ and QSFP+ active optical cables.
Provides instructions for mounting and connecting the QFX5100 device.
Details procedures for mounting the QFX5100 device in a rack or cabinet.
Explains how to connect the QFX5100 device to earth ground for safety.
Details the procedure for connecting AC power to the QFX5100 switch.
Outlines the procedure for connecting DC power to the QFX5100 switch.
Explains how to connect the QFX5100 for out-of-band management.
Provides steps to perform the initial configuration of the QFX5100 switch via CLI.
Provides instructions for powering off the QFX5100 switch gracefully.
Guides on safely removing the QFX5100 device from its rack or cabinet.
Details the process for installing a fan module into the QFX5100 chassis.
Provides instructions for removing a fan module from the QFX5100 chassis.
Guides on installing a power supply into the QFX5100 chassis.
Details the procedure for removing a power supply from the QFX5100 chassis.
Guides on installing expansion modules into the QFX5100-24Q/24Q-AA.
Details the procedure for removing expansion modules from QFX5100 devices.
Guides on safely removing transceivers from QFX Series devices.
Details the procedure for installing transceivers into QFX Series devices.
Provides steps to create a bootable device for emergency Junos OS installation.
Guides on how to perform a recovery installation using an emergency boot device.
Provides general safety guidelines and warnings for handling equipment.
Details electrical safety guidelines, warnings, and precautions.
To Next Page