Juniper QFX5100 - Qfx5100

Table 42: SFP+ Active Direct Attach Copper Cable Specifications (continued)
SpecificationsProduct Number
10-Gbps full-duplex serial transmissionRateQFX-SFP-DAC-10MA
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
0.627 WPower consumption (per end)
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
28 AWGWire AWG
2 in. (5 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
2% maximumCrosstalk between pairs
10 m (32.8 ft)Length
Related
Documentation
Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the QFX Series on
page 94
•
• Interface Specifications for QSFP+ DAC Breakout Cables for the QFX Series on page 135
• Interface Specifications for QSFP+ DAC Cables for the QFX Series on page 140
• Installing a Transceiver in a QFX Series Device on page 214
• Removing a Transceiver from a QFX Series Device on page 213
Interface Specifications for SFP+ and QSFP+ Active Optical Cables for the QFX5100
An active optical cable (AOC) is a fiber assembly that has the transceivers permanently
attached. Juniper Networks provides AOC solutions for both10-GbE and 40-GbE.
Use theHardware CompatibilityTool and Table 43 on page 133 to locatethe specifications
for 10-GbE AOC and Table 36 on page 93 for 40-GbE AOC.
Copyright © 2016, Juniper Networks, Inc.132
QFX5100 Switch Hardware Guide