Figure 11: Management Panel Components on 1 U QFX5100
4—1— em0–RJ-45 (1000 Base-T) management
Ethernet port (C0)
Some SKUs have an additional SFP
management Ethernet port (second C0)
Status LEDs
5—2—
RJ-45 console port (CON) )em1–SFP management Ethernet port (C1)
Cage (socket for either 1 GbE copper SFP or
fiber SFP)
6—3— USB port
Reset button,seecaution statement below
CAUTION: Do not use the Reset button to restart the power sequence unless
under the direction of Juniper Networks Technical Assistance Center (JTAC).
Copyright © 2016, Juniper Networks, Inc.20
QFX5100 Switch Hardware Guide
To Next Page
Loading...
