Need help?Do you have a question about the Juniper QFX3500 and is the answer not in the manual?
General| Model | QFX3500 |
|---|---|
| Product Type | Switch |
| Form Factor | 1U |
| RAM | 4 GB |
| Jumbo Frame Support | Yes |
| Power Supply | AC or DC |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
| Humidity | 5 to 90% RH (non-condensing) |
| Ports | 48 x 10/100/1000 BASE-T Ethernet ports |
| Uplink Ports | 4 x 40 Gigabit Ethernet QSFP+ |
| Dimensions | 17.3 x 1.7 x 17.5 in (43.9 x 4.3 x 44.5 cm) |
Provides a high-level introduction to the QFX3500 device's function and configuration options.
Details QFX3500 chassis specs, FRUs, panels, LEDs, management board, and airflow.
Explains the QFX3500 device's cooling system, fan trays, and airflow design.
Covers AC/DC power supply specs, LEDs, airflow, and related safety for QFX3500/3600.
Outlines site prep tasks, environmental, wiring, rack/cabinet, and clearance requirements for QFX3500.
Details QFX3500 AC/DC power specs, cords, grounding, and electrical safety guidelines.
Covers QFX interface support, QSFP+/QSFP28 cables, console/management cables, and fiber-optic signal loss.
QFX Series pinout for USB, Console, and RJ-45 Management ports.
Instructions for unpacking, mounting QFX3500 in racks/cabinets, and rack installation procedures.
Guides on connecting earth ground, AC power, and DC power to the QFX3500 device.
Details QFX3500 network connection for OOB management, console access, and Virtual Chassis cabling.
QFX3500 config for standalone, Virtual Chassis (adding members, pre/non-provisioned).
Procedures for replacing QFX3500 FRUs: fan trays, power supplies, management boards, transceivers.
Instructions for QFX transceiver and fiber-optic cable installation, removal, and maintenance.
Procedures for powering off and physically removing the QFX3500 device from its installation.
Explanation of alarm terms, chassis alarms, and interface alarms for QFX3500 monitoring.
Guides on creating an emergency boot device and performing a Junos OS recovery installation.
Covers general safety, warning levels, qualified personnel, and basic electrical safety guidelines.
Details fire safety procedures, extinguisher types, and equipment protection for QFX3500.
Covers installation warnings, chassis lifting, restricted access, ramp, rack/cabinet, and grounded equipment safety.
Warnings for open port radiation, Class 1M laser products, and fiber-optic cable safety.
Safety warnings for battery handling, jewelry, lightning, temperature, and product disposal.
Covers electrical safety, ESD, AC/DC power, grounding, wiring, and disconnection warnings.
Details QFX Series agency approvals, EMC requirements, and statements of volatility.
To Next Page