5. Grasp the management board handle and pull firmly to slide the management board
halfway out of the chassis.
6. When the fans stop spinning, slide the management board completely out of the
chassis.
7. Place the management board in the antistatic bag or on the antistatic mat placed on
a flat, stable surface.
Figure 55: Removing a Management Board from a QFX3500 Device
Related
Documentation
• Management Board for a QFX3500 Device on page 24
• Field-Replaceable Units in a QFX3500 Device on page 18
• Front Panel of a QFX3500 Device on page 19
• Connecting a QFX3500 Device to a Network for Out-of-Band Management
• Connecting a QFX Series Device to a Management Console
• Installing a Management Board in a QFX3500 Device on page 128
131Copyright © 2017, Juniper Networks, Inc.
Chapter 13: Replacing Components
To Next Page
Loading...
