Juniper QFX3500 - Laser and LED Safety Guidelines and Warnings for the QFX Series; Class 1 M Laser Product Warning

¡Atención! Debido a que laaperturadel puerto puede emitir radiacióninvisible
cuando no existe un cable de fibra conectado, evite mirar directamente a las
aperturas para no exponerse a la radiación.
Varning! Osynlig strålning kan avges från en portöppning utan ansluten
fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte
stirra in i oskyddade öppningar.
Related
Documentation
General Safety Guidelines and Warnings on page 169•
• Laser and LED Safety Guidelines and Warnings
• Laser and LED Safety Guidelines and Warnings for the ACX5000 Router
• Installation Instructions Warning on page 177
• Grounded Equipment Warning on page 184
Laser and LED Safety Guidelines and Warnings for the QFX Series
In addition to the general guidelines provided in Laser and LED Safety Guidelines and
Warnings, follow these warnings and guidelines that are specific to QFX Series devices.
QFX Series devices are equipped with laser transmitters:
•
SFP and SFP+ transceivers are classified as Class 1 Laser Products (complies with 21
CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice 50, dated July
26, 2001) or Class 1 LED Products.
•
QSFP+ and QSFP28transceivers are classified as Class 1M Laser Products (IEC 60825-1
2001–01).
Observe the following guidelines and warnings:
•
Class 1M Laser Product Warning on page 188
•
Class 1M Laser Radiation Warning on page 189
•
Unterminated Fiber-Optic Cable Warning on page 189
Class 1M Laser Product Warning
WARNING: Class 1M laser product.
Waarschuwing Laserproducten van Klasse 1M (IEC).
Varoitus Luokan 1M (IEC) lasertuotteita.
Attention Produits laser catégorie 1M (IEC).
Warnung Laserprodukte der Klasse 1M (IEC).
Copyright © 2017, Juniper Networks, Inc.188
QFX3500 Device Hardware Documentation