Juniper QFX3500 - Front Panel of a QFX3500 Device; Figure 5: QFX3500 Device Front Panel; Figure 6: QFX3500 Device Front

Front Panel of a QFX3500 Device
The front panel of the QFX3500 device consists of the following components:
•
Management board
•
Chassis serial number label and ESD point
NOTE: The chassis serial number ID label is located on a sliding panel to
the right of the fan tray on a QFX3500 device (see Figure 6 on page 19).
To use the sliding panel as an ESD point, pull the sliding panel partway out
of the chassis, and connect a clip-style or tape-style ESD grounding strap
to the panel.
•
Fan trays
•
Power supplies
Figure 5 on page 19 and Figure 6 on page 19 show the front of a QFX3500 device.
Figure 5: QFX3500 Device Front Panel
1
1
0
0
QFX3500-48S4Q
CO
C
O
N
C1
OK/
g050012
Management
board
Fan tray 0 Fan tray 1
AC power
supply 0
AC power
supply 1
Figure 6: QFX3500 Device Front
FX3500-48S4Q
CO
C1
Management
board
Fan
tray
Fan
tray
Power
supply
Power
supply
Mounting
bracket
Mounting
bracket
g050000
ESD point/
serial number
ID label
Related
Documentation
Field-Replaceable Units in a QFX3500 Device on page 18•
• Rear Panel of a QFX3500 Device on page 20
• USB Port Specifications for the QFX Series on page 69
• Management Board for a QFX3500 Device on page 24
• Chassis Status LEDs on a QFX3500 Device on page 23
• Cooling System and Airflow for a QFX3500 Device on page 29
• AC Power Supply for a QFX3500, QFX3600, or QFX3600-I Device on page 35
19Copyright © 2017, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions