Juniper QFX3500 - Access Port and Uplink Port Leds on a QFX3500 Device; Figure 7: QFX3500 Device Rear Panel; Figure 8: Leds on the SFP+ Access Ports

Figure 7 on page 21 shows the rear panel of a QFX3500 device.
Figure 7: QFX3500 Device Rear Panel
10-Gigabit Ethernet
or Fibre Channel ports
QSFP+ Uplink ports
10-Gigabit Ethernet
or Fibre Channel ports
10-Gigabit Ethernet
or 1-Gigabit Ethernet ports
LA
ST
LA
ST
LA
ST
LA
ST
Q0 Q1 Q2 Q3 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 470 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
g050013
0 1 2 3 4 5
42 43 44 45 46 47
Related
Documentation
Field-Replaceable Units in a QFX3500 Device on page 18•
• Front Panel of a QFX3500 Device on page 19
• Access Port and Uplink Port LEDs on a QFX3500 Device on page 21
• Installing and Removing QFX3500 Device Hardware Components on page 121
Access Port and Uplink Port LEDs on a QFX3500 Device
Each access port and uplink port on a QFX3500 device has two LEDs. The two figures
in this topic show the location of those LEDs:
•
Figure 8 on page 21 shows the location of the LEDs on the SFP+ access ports.
•
Figure 9 on page 22 shows the location of the LEDs on the QSFP+ uplink ports.
Figure 8: LEDs on the SFP+ Access Ports
0 1 2 3 4 5
g050019
Link/Activity
LED
Status
LED
21Copyright © 2017, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions