EasyManua.ls Logo

Juniper QFX3500 - Hardware; Software

Juniper QFX3500
238 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
system devices as a single network entity, which enables simplified management of your
data center using the Junos OS command-line interface (CLI).
In a QFX Virtual Chassis, the QFX3500 device can participate with other QFX3500 devices
and QFX3600 devices in a ring topology with up to 10 members.
In a QFX5100 Virtual Chassis Fabric, the QFX3500 device can participate as a leaf device.
Up to a total of 20 devices can participate in the QFX5100 Virtual Chassis Fabric.
Software on page 4
Hardware on page 4
Software
QFX Series devices use the Junos operating system (OS), which provides Layer 2 and
Layer 3 switching, routing, and security services. Junos OS is installed on the QFX3500
device’s 8-gigabyte (GB) internal flash drive. The same Junos OS code base that runs
on QFX3500 devices also runs on all Juniper Networks EX Series switches, and J Series,
M Series, MX Series, and T Series routers.
For more information about which features are supported on QFX Series devices, see
Feature Explorer.
When the QFX3500 device is operating as a standalone switch, you manage the switch
using the Junos OS command-line interface (CLI), accessible through the console and
out-of-band management ports on the device.
When a QFX Series device operates as part of a QFabric system, all the devices in the
data center fabric are managed through the Administrator software installed on the
QFX3100 Director devices. Each device in a QFabric system is interconnected in a single
control plane and management network, using the redundant management ports on
each device.
Hardware
The compact QFX3500 device is 1 rack unit (1 U) in size and designed to fit in
industry-standard 19-inch rack-mount enclosures. See Figure 1 on page 5 and
Figure 2 on page 5 and “Chassis Physical Specifications for a QFX3500 Chassis” on
page 17.
NOTE: The standard mounting configuration for the QFX3500 device uses
a two rail mounting system. The QFX3500-RB-ACRB device model uses a
four rail mounting system for installations that need to recess the switch or
need to mount the port (rear) end of the switch forward.
Copyright © 2017, Juniper Networks, Inc.4
QFX3500 Device Hardware Documentation

Table of Contents

Related product manuals