Juniper QFX3500 - Chapter 2 Chassis Components and Descriptions; Chassis Physical Specifications for a QFX3500 Chassis; Table 3: Physical Specifications for the QFX3500 Device Chassis

CHAPTER 2
Chassis Components and Descriptions
•
Chassis Physical Specifications for a QFX3500 Chassis on page 17
•
Field-Replaceable Units in a QFX3500 Device on page 18
•
Front Panel of a QFX3500 Device on page 19
•
Rear Panel of a QFX3500 Device on page 20
•
Access Port and Uplink Port LEDs on a QFX3500 Device on page 21
•
Chassis Status LEDs on a QFX3500 Device on page 23
•
Management Board for a QFX3500 Device on page 24
•
Management Port LEDs on a QFX3500 Device on page 26
Chassis Physical Specifications for a QFX3500 Chassis
The QFX3500 device chassis is a rigid sheet-metal structure that houses the hardware
components. Table 3 on page 17 summarizes the physical specifications of the QFX3500
chassis.
Table 3: Physical Specifications for the QFX3500 Device Chassis
ValueDescription
1.74 in. (4.4 cm)Chassis height
•
Including mounting brackets: 19 in. (48.3 cm)
•
Excluding mounting brackets: 17.4 in. (44.2 cm)
Chassis width
•
Including FRU handles and locking levers: 29.2 in. (74.2 cm)
•
Excluding FRU handles and locking levers: 28 in. (71.1 cm)
Chassis depth
•
With FRUs installed: 30.8 lb (14 kg)
•
Without FRUs installed: 23.8 lb (11 kg)
•
AC power supply: 2.2 lb (1 kg)
•
Fan tray: 0.9 lb (0.4 kg)
•
Management board: 1.3 lb (0.6 kg)
Weight
Related
Documentation
Rack Requirements for a QFX3500 Device on page 51•
17Copyright © 2017, Juniper Networks, Inc.