AC Power Cord Specifications for a QFX Series Device
Detachable AC power cords are shipped with the chassis, if you include them as part of
your order. The coupler is type C13 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 feet
(approximately 4.5 meters)in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords that can be ordered for the QFX
Series switches are in compliance.
Table 24 on page 56 lists AC power cord specifications provided for each country or
region.
Table 24: AC Power Cord Specifications
GraphicJuniper Model NumberPlug StandardsElectrical SpecificationsCountry/Region
CG_CBL-C13-06-AUAS/NZ 3109-1996250 VAC, 10 A, 50 HzAustralia
CG_CBL-C13-06-CHGB 1002-1996250 VAC, 10 A, 50 HzChina
CG_CBL-C13-06-EUCEE (7) VII250 VAC, 10 A, 50 HzEurope (except Italy,
Switzerland, and United
Kingdom)
CG_CBL-C13-06-ITCEI 23-16/VII250 VAC, 10 A, 50 HzItaly
CG_CBL-C13-06-JPJIS C8303125 VAC, 12 A, 50 Hz or 60 Hz
CG_CBL-C13-06-USCAN/CSA No. 49-92125 VAC, 13 A, 60 HzNorth America
CG_CBL-C13-06-KRKSC 8305; K60884-1250 VAC, 10 A, 60 HzSouth Korea
CG_CBL-C13-06-SZSEV 1011 SEV 1991; EN
60320 C13
250 VAC, 10 A, 50 HzSwitzerland
CG_CBL-C13-06--UKBS 1363/A250 VAC, 10 A, 50 HzUnited Kingdom
Related
Documentation
AC Power Supply for a QFX3500, QFX3600, or QFX3600-I Device on page 35•
Copyright © 2017, Juniper Networks, Inc.56
QFX3500 Device Hardware Documentation
To Next Page
Loading...
