Juniper QFX3500 - Multiple Power Supplies Disconnection Warning; TN Power Warning

em circuito fechado e planas com terminais de orelha voltados para cima.
Estas terminações de cabo deverão ser do tamanho apropriado para os
respectivos cabos, e deverão prender simultaneamente o isolamento e o fio
condutor.
¡Atención! Cuando se necesite hilo trenzado, utilizar terminales para cables
homologados, tales como las de tipo "bucle cerrado" o "espada", con las
lengüetas de conexión vueltas hacia arriba. Estos terminales deberán ser del
tamaño apropiado paraloscables que se utilicen, y tendrán que sujetartanto
el aislante como el conductor.
Varning! När flertrådiga ledningar krävs måste godkända ledningskontakter
användas, t.ex. kabelsko av sluten eller öppen typ med uppåtvänd tapp.
Storleken pådessa kontakter måstevara avpassad till ledningarna och måste
kunna hålla både isoleringen och ledaren fastklämda.
Related
Documentation
General Safety Guidelines and Warnings on page 169•
• General Electrical Safety Guidelines and Warnings on page 197
• DC Power Electrical Safety Guidelines for Switches on page 202
• DC Power Disconnection Warning on page 205
• DC Power Grounding Requirements and Warning on page 206
• DC Power Wiring Sequence Warning on page 207
Multiple Power Supplies Disconnection Warning
WARNING: For a device that has more than one power supply connection,
you must ensure that all power connections are fully disconnected so that
power to the device is completely removed.
Related
Documentation
General Safety Guidelines and Warnings on page 169•
• General Electrical Safety Guidelines and Warnings on page 197
• AC Power Electrical Safety Guidelines on page 200
• DC Power Electrical Safety Guidelines for Switches on page 202
TN Power Warning
WARNING: The device is designed to work with a TN power system.
Copyright © 2017, Juniper Networks, Inc.210
QFX3500 Device Hardware Documentation