Port Panel of a QFX5100-24Q-AA Device
The port panel of the QFX5100-24Q-AA switch consists of 24 quad small-form factor
pluggableplus (QSFP+) 40-Gigabit Ethernet ports. Each QSFP+ socket can be configured
to support 40-Gigabit Ethernet or as a set of four independent 10-Gigabit Ethernet ports
using breakout cables (channelization mode). The QFX5100-24Q-AA can also be
configured to support 96 10-Gigabit Ethernet ports using breakout cables (channelization
mode) with 1280 Gbps output. Any of the 24 ports can be configured as either an uplink
port or an access port.
The expansion module bay of the QFX5100-24Q switch is located on the port panel. In
the expansion module bay, you can install a single double-wide expansion module
(QFX-PFA-4Q) or two single-wide optional expansion modules (QFX-EM-4Q and
EX4600-EM-8F, in any combination). When you install two single-wide expansion
modules, the slot on your left hand side is slot 1 (QIC0), and the slot on your right hand
side is slot 2 (QIC1).
The QFX-PFA-4Q module addsfour QSFP+ ports tothe chassis. The QFX-EM-4Q module
adds four QSFP+ ports to the chassis and the EX4600-EM-8F module adds eight
10-Gigabit SFP+ ports to the chassis. The QFX-EM-4Q ports can be configured as either
access ports or as uplinks ports, but only ports 0 and 2 can be channelized by using port
mode. The QFX-EM-4Q ports can also be configured as either access ports or uplink
ports, but only ports 0 and 2 can be channelized by using port mode. Figure 13 on page 23
shows the port panel of the QFX5100-24Q-AA device.
Figure 15: Port Panel of a QFX5100-24Q-AA Switch
3—1— Expansion modulebay (with a QFX-PFA-4Q
expansion module installed)
Electrostatic discharge (ESD) terminal
2—QSFP+ ports (24)
For details on port LEDs, see “Port Panel of a QFX5100-24Q Device” on page 23.
Related
Documentation
Field-Replaceable Units in a QFX5100 Device on page 12•
• Port Panel of a QFX5100-24Q Device on page 23
• Port Panel of a QFX5100-48S Device on page 28
• Port Panel of a QFX5100-96S Device on page 32
• Access Port and Uplink Port LEDs on a QFX5100 Device on page 57
• Installing and Removing QFX5100 Device Hardware Components on page 201
27Copyright © 2016, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions
To Next Page
Loading...
