Table 28: AC Power Specifications for a QFX5100 Device (continued)
SpecificationItem
Maximum power consumption
365 WQFX5100-24Q
365 WQFX5100-48S
395 WQFX5100-48T
470 WQFX5100-96S
Related
Documentation
AC Power Cord Specifications for a QFX Series Device on page 80•
• AC Power Supply for a QFX5100 Device on page 47
• General Safety Guidelines and Warnings on page 239
• General Electrical Safety Guidelines and Warnings on page 261
AC Power Cord Specifications for a QFX Series Device
Detachable AC power cords are shipped with the chassis, if you include them as part of
your order. The coupler is type C13 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 feet
(approximately 4.5 meters) in length,to comply with National ElectricalCode
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords that can be ordered for the QFX
Series switches are in compliance.
Table 29 on page 81 lists AC power cord specifications provided for each country or
region.
Copyright © 2016, Juniper Networks, Inc.80
QFX5100 Switch Hardware Guide
To Next Page
Loading...
