Juniper QFX5100 - Locating the Chassis Serial Number ID Label on a QFX5100 Switch; Figure 90: Location of the Serial Number ID Label on a QFX5100-96 S Switch; Figure 91: Location of the Serial Number ID Label on a QFX5100-48 S Switch

NOTE: You must remove the fan module to read the fan serial number from
the serial number ID label. The fan module serial number cannot be viewed
through the CLI. Fan Tray 2 refers to the third module from the left, counting
from 0.
Locating the Chassis Serial Number ID Label on a QFX5100 Switch
The location for the chassis serial number ID label is product SKU-dependent. On the
QFX5100-96S and QFX5100-48S product SKUs, the serial number ID label is located
on the left side of the port panel. On legacy switches, or switches with an LCD, the port
panel is referred to as the front panel. See Figure 90 on page 225 through
Figure 92 on page 226 for examples of where to find the serial number ID. On the
QFX5100-24Q, the serial number ID label is located next to the left expansion port on
the port panel. See Figure 93 on page 226.
Figure 90: Location of the Serial Number ID Label on a QFX5100-96S
Switch
g050308
SN:TA3113280064
Figure 91: Location of the Serial Number ID Label on a QFX5100-48S
Switch
SN:TA3113280064
225Copyright © 2016, Juniper Networks, Inc.
Chapter 21: Contacting Customer Support and Returning the Chassis or Components