Juniper QFX5100 - Table 48: QSFP+ Active DAC Breakout Cable Specifications

Table 47: QSFP+ DAC Passive Breakout Cable Specifications (continued)
SpecificationsProduct SKU
40-Gbps full-duplex serial transmissionRateQFX-QSFP-DACBO-5M
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
-40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
1 in. (2.54 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
4.3 nsec/mTime delay
5 m (16.4 ft)Length
14.1X53-D40Minimum Junos OS release
Table 48: QSFP+ Active DAC Breakout Cable Specifications
SpecificationsProduct SKU
40-Gbps full-duplex serial transmissionRateJNP-QSFP-DACBO-5MA
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
0.3 in. (0.762 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
4.5 nsec/mTime delay
5 m (16.4 ft)Length
Copyright © 2016, Juniper Networks, Inc.138
QFX5100 Switch Hardware Guide