Juniper QFX5100 - CHAPTER 11 Installing the Switch; Installing and Connecting a QFX5100 Device

Table 48: QSFP+ Active DAC Breakout Cable Specifications (continued)
SpecificationsProduct SKU
40-Gbps full-duplex serial transmissionRateJNP-QSFP-DACBO-7MA
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
0.3 in. (0.762 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
4.5 nsec/mTime delay
7 m (22.9 ft)Length
40-Gbps full-duplex serial transmissionRateJNP-QSFP-DACBO-10MA
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
28 AWGWire AWG
1 in. (2.54 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
10 m (32.8 ft)Length
14.1X53-D35Minimum Junos OS release
Related
Documentation
Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the QFX Series on
page 94
•
• Interface Specifications for SFP+ DAC Cables for the QFX Series on page 126
• Interface Specifications for QSFP+ DAC Cables for the QFX Series on page 140
• Installing a Transceiver in a QFX Series Device on page 214
139Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Port and Interface Specifications