Juniper QFX5100 - Table 47: QSFP+ DAC Passive Breakout Cable Specifications

Table 47: QSFP+ DAC Passive Breakout Cable Specifications
SpecificationsProduct SKU
40-Gbps full-duplex serial transmissionRateQFX-QSFP-DACBO-1M
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
1 in. (2.54 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
4.3 nsec/mTime delay
1 m (3.3 ft)Length
40-Gbps full-duplex serial transmissionRateQFX-QSFP-DACBO-3M
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
1 in. (2.54 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
4.3 nsec/mTime delay
3 m (9.9 ft)Length
137Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Port and Interface Specifications