Juniper QFX5120-48Y - Figure 7 Locating and Removing Main Board

UNCLASSIFIED 10/27/2021
` UNCLASSIFIED 6
5mm Hex standoff
Main board screws
MAC Heatsink screws
Hold front panel cover on both hands and pull outward to remove front panel
Main Board
CPU Board
PSUs
FANs
Figure 7 Locating and removing main board
e. Heat sink support plate on bottom side of main board. Unfasten the
MAC heat sink screws (4x) to remove heat sink support plate.
Note: Heatsink need not be detached for removing support plate.