Meet the SRX345
The Juniper Networks
®
SRX345 Firewall securely consolidates security, routing, switching, and WAN connectivity in a
compact 1-U chassis. It supports up to 5-Gbps firewall throughput and 800-Mbps IPsec VPN to meet the needs of midsize,
distributed-enterprise locations. Along with Juniper Sky™ Enterprise and Contrail Service Orchestration
®
(CSO), the
SRX345 delivers fully automated SD-WAN to both enterprises and service providers. A zero-touch provisioning (ZTP)
feature simplifies branch network connectivity for initial deployment and ongoing management.
The SRX345 has eight 1 GbE RJ-45 ports, eight 1 GbE SFP ports, one management port, one console port, and four
Mini-Physical Interface Module (Mini-PIM) slots. The RJ-45 and SFP ports are MACsec capable. The SRX345 AC models
have either a single AC power supply or dual AC power supplies. The SRX345 DC models have a single power supply.
This guide covers SRX345 AC models.
Install the SRX345 in a Rack
IN THIS SECTION
What’s in the Box? | 2
What Else Do I Need? | 2
Rack It | 3
What’s in the Box?
•
SRX345 Firewall
•
A power cord appropriate for your geographic location
•
A USB cable
•
Two mounting brackets
•
Eight mounting screws to attach the mounting brackets to the SRX345
What Else Do I Need?
You’ll also need:
2
To Next Page
Loading...
