■ Place excess cable out of the way in a neatly coiled loop.
■ Use fasteners to maintain the shape of the cable loops.
8. Power on the services gateway.
9. Verify that the GPIM STATUS LED glows steadily green to confirm that the GPIM
is online.
Related Topics ■ Removing a Blank GPIM Faceplate from the SRX650 Services Gateway
■ Removing a GPIM from the SRX650 Services Gateway
2 ■ Installing a GPIM on the SRX650 Services Gateway
To Previous Page
Loading...
Need help?
General
