30
ENA X1
First-time use
The On/Off button also acts as a power
switch. When the ENA is switched off, the
machine consumes no standby energy.
WARNING
If the machine is operated with a defective power
cable, there is a danger of electric shock.
Never use a machine which has a defective
power cable.
Precondition: The water tank must be full.
Insert the mains plug into a power socket.
Q T Press the On/Off button to switch the
machine on.
SPRACHE DEUTSCH
g T Turn the Rotary Switch until LANGUAGE
ENGLISH is displayed.
k T Press the Rotary Switch to confirm the
language setting.
OK, the language is then adjusted.
OPEN TAP
Place a receptacle under the nozzle.
l T Turn the switch to position m.
SYSTEM FILLING
CLOSE TAP
E
J
T
T
T
y T Turn the switch to position o.
HEATING
PRESS ROTARY
Place a receptacle under the coffee spout.
k T Press the Rotary Switch to start rinsing.
RINSING, the system is being rinsed.
Rinsing stops automatically.
READY
When a coffee speciality has been
prepared for the first time, it is possible
that FILL BEANS appears on the
display as the grinder has not yet been
completely filled with coffee beans. In this
case prepare a different coffee speciality.
Using and activating filter
Your ENA no longer requires descaling if you use
CLARIS Blue filter cartridges.
Perform the ‘Insert filter’ operation without
interruptions. This will ensure optimum
function of your ENA.
After two months the filter capacity is
reached. The elapsed time can be checked
with the date plate on the filter holder.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
Press the P button P and the Maintenance
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until FILTER - is
displayed.
k T Press the Rotary Switch to enter theto enter the
programme item.
NO -
g T Turn the Rotary Switch until YES p
appears.
k T Press the Rotary Switch to confirm theto confirm the
setting.
OK
INSERT FILTER
Remove and empty the water tank.
Open the filter holder.
T
E
E
E
T
T
T
T
To Next Page
Loading...
