Jura IMPRESSA A5 OT - Further Components Disassembly

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
ENA Micro line / IMPRESSA A line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontage_ENA_Micro_EN.docx
L:\Geräte\Linie_A\A5_OT\Schulungsunterlagen\E\Demontag
e_ENA_Micro_EN.docx
Date:
Rev. G:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
06.10.2011
20.02.2014
21.03.2012
19.09.2012
14.11.2012
27.03.2013
17.09.2013
Page 7/26
13. Sliding-in a small screw driver to release lower
barb (slot under appliance base) and keep in
position
14. On both sides, pull outside the lateral part with
your thumb (or similar aid).
Pull backwards the whole lateral part.
Proceed the same way for the other
lateral part.
1.3 Disassembling of further components:
15. Remove with a screw driver the cover of the
brewing unit
16. View:
Brewing unit cover removed.