Jura IMPRESSA C50 User Manual

24
4 Permanent settings in programming mode
4 Permanent settings in programming mode
You can make permanent settings in programming mode. You can
navigate through the programme items and permanently save the
required settings simply by turning and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Programme item Sub-item Explanation
RINSE RINSE,
CLEAN,
FILTER (only if filter
is activated),
DESCALE (only if
filter is not activated)
T Select the desired maintenance programme.
BUTTONS
T Select your settings for speciality coffees.
FILTERw/
FILTER-
YES,
NO
T Indicate whether you are operating your
IMPRESSA with or without a CLARIS Blue filter
cartridge.
HARDNESS (only if
filter is not activated)
1°dH–30°dH
T Adjust the water hardness.
ENERGYw/
ENERGY-
SAVEw,
SAVE-
T Choose whether you want to operate your
IMPRESSA with or without energy-saving
mode.
OFF FROM 15MIN., 30MIN.,
1HRS.–15HRS.
T Set the time after which the IMPRESSA
should switch off automatically.
DISPLAY ML, OZ
T Select the unit for the amount of water.
LANGUAGE
T Select your language.
EXIT
T Exit programming mode.
E You can exit programming mode directly at any time. Simply
touch the P symbol for approximately 2 seconds.

Jura IMPRESSA C50 Specifications

General

Product type	Espresso machine
Capacity in cups	16 cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.9 L
Coffee beans capacity	200 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Number of temperature settings	2
Product color	Black
Housing material	-
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	415 mm
Width	280 mm
Height	345 mm
Weight	9000 g