Jura IMPRESSA C50 User Manual

29
5 Maintenance
5 Maintenance
Your IMPRESSA has the following integrated maintenance pro-
grammes:
U
Rinsing the machine (RINSE)
U
Cleaning the machine (CLEAN)
U
Changing the filter (FILTER) (only if filter is activated)
U
Descaling the machine (DESCALE) (only if filter is not acti-
vated)
E Clean the machine, change the filter or descale the machine
when you are prompted to do so.
E You can start the maintenance programmes at any time in
programming mode (programme item
RINSE).
E Your IMPRESSA will not prompt you to clean the fine foam
frother. In the interests of hygiene, you should clean the fine
foam frother daily when you have been preparing milk.
You can initiate the rinse operation manually at any time.
Precondition:
ESPRESSO is displayed (example).
T Place a receptacle under the coffee spout.
 O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
 k T Press the Rotary Switch to enter the programme item.
RINSE
 k T Press the Rotary Switch to initiate the rinse operation.
RINSING, water flows out of the coffee spout.
The rinse stops automatically.
ESPRESSO appears on the
display (example).
Rinsing the machine

Jura IMPRESSA C50 Specifications

General

Product type	Espresso machine
Capacity in cups	16 cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.9 L
Coffee beans capacity	200 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Number of temperature settings	2
Product color	Black
Housing material	-
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	415 mm
Width	280 mm
Height	345 mm
Weight	9000 g