7
IMPRESSA C9 – Quick Reference Guide
T Empty the drip tray and coffee grounds container and put
them back into the machine.
FILL WATER TANK
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold mains water and rein-
sert.
PRESS RINSE, the maintenance button c lights up.
T Replace the frother.
T Place a receptacle under the frother.
c T Press the maintenance button.
DE-SCALING, water flows out of the frother.
The operation stops automatically,
EMPTY TRAY.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
The descaling operation is now complete. Your IMPRESSA
heats up and is once again ready to use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
To ensure that the Easy Cappuccino Frother works perfectly, you
should rinse it with water whenever you have prepared some milk.
Your IMPRESSA will prompt you to rinse the Easy Cappuccino Frother
10 minutes after you have prepared milk.
Precondition: CAPPUCCINO RINSE is displayed and the main-
tenance button c lights up.
T Place a receptacle under the Easy Cappuccino Frother.
c T Press the maintenance button.
CAPPUCCINO RINSING, the frother is rinsed.
Preparation stops automatically.
READY appears on the
display.
Rinsing the Easy
Cappuccino Frother
To Next Page
Loading...
