Jura IMPRESSA C9 - Disassembling and Rinsing the Easy Cappuccino Frother; Rinsing the Professional Cappuccino Frother

9
IMPRESSA C9 – Quick Reference Guide
T Carefully remove the frother from the Connector System
©
by twisting slightly.
T Dismantle the frother completely.
T Rinse all the frother parts thoroughly under running water.
T Reassemble the frother.
E Ensure that the individual parts are correctly and firmly
attached to one another to ensure optimum function of the
frother.
T Firmly attach the frother to the Connector System
©
.
To ensure that the Professional Cappuccino Frother works perfectly,
you should rinse it with water whenever you have prepared some
milk.
Your IMPRESSA will prompt you to rinse the Professional Cappuc-
cino Frother 10 minutes after you have prepared milk.
Precondition:
CAPPUCCINO RINSE is displayed and the main-
tenance button c lights up.
T Place a receptacle under the Professional Cappuccino
Frother.
c T Press the maintenance button.
CAPPUCCINO RINSING, the frother is rinsed.
Preparation stops automatically.
READY appears on the
display.
Disassembling and
rinsing the Easy
Cappuccino Frother
Rinsing
the Professional
Cappuccino Frother