17
SELECT PRODUCT
Select the product, the water quantity of which you want to
programme ( / / )
COFFEE 90 ML
Press symbol , the value flashes.
Use symbols to change the value in 5 ml increments.
Press symbol to save the water quantity for this product.
WATER QUANTITY
Use the symbols to reach the next programming stage
or press programming key to quit Programming Mode.
13.6 Programming 1 cup
Now, you will program the draw-off key 1 cup (3). This has
no influence on the touch screen.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key until you hear an acoustic signal.
Press symbol until the following message is displayed:
1 CUP 120 ML.
Press symbol , the value flashes.
Use symbols to change the value in 5 ml increments.
Press symbol to save the water quantity for 1 cup.
1 CUP NORMAL
Press one of the symbols ( / / ) to select the strength of
your coffee.
1 CUP STRONG
Press symbol to save the new settings.
1 CUP 180 ML (for example)
Use the symbols to reach the next programming stage or
press key to quit Programming Mode.
These settings were taken over for the draw-off key for 2
cups.
13.7 Programming the steam portion
The programmable steam portion time is between 3 and 60
seconds.
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key until you hear an acoustic signal.
Press symbol until the following message is displayed:
STEAM 20 SEC.
Press symbol , the value 20 flashes.
Press symbols to change the value.
Press symbol to save the new value.
STEAM 40 SEC (Example)
Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
E
To Next Page
Loading...
