Jura IMPRESSA J Series - Remove Control Panel Module; Disconnect Control Panel Connections; Lift Front Covers Upwards; Remove Right Front Panel

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
IMPRESSA J/XJ line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontageanleitung_J_Linie_EN.doc
L:\Geräte\Linie_J\J9\J9_4_OneTouch_TFT\Schulungs_Unterlag
en\E\Demontageanleitung_J_Linie_EN.doc
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
28.09.2006
27.08.2013
Page 7/18
15. Removing control-panel:
- Unscrew 2x TORX15 from the control-panel-
module
- Cable case is secured with snap-locks
- Un-plug 3x connectors, cup-illuminating lights
and control panel
16. Removing control-panel:
- Un-plug 3x connectors, cup-illuminating lights
and control panel
17. Remove the left and right front-cover by lifting
them upwards
18. Unscrew first the 2x TORX15 of the
water-/steam-tap to be able to remove the right
front panel