Jura IMPRESSA J Series - Clean Coffee Outlet with TORX9; Remove Coffee Outlet using TORX8; View Disassembled Coffee Outlet; Detach Brewing Unit Hose for Outlet Removal

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
IMPRESSA J/XJ line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontageanleitung_J_Linie_EN.doc
L:\Geräte\Linie_J\J9\J9_4_OneTouch_TFT\Schulungs_Unterlag
en\E\Demontageanleitung_J_Linie_EN.doc
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
28.09.2006
27.08.2013
Page 8/18
19. Clean the coffee outlet by unscrewing
2x TORX9
20. To remove the complete coffee outlet, release
2 snap-locks with a small screwdriver.
Unscrew TORX8 (access via the lined arrow).
21. View of the disassembled coffee outlet
(position of the TORX8)
22. Unplug the cup-illuminating cables and take off
the hose of the brewing unit to completely
remove the coffee outlet
23. When replacing the incoming feeder, one shall
connect a dummy-cable to the old one for being
able to pull-in the new one
(cable box cannot be opened)
24. If a clamping spring is loosened, one has to
replace the webbing-hose as it will become
not dense anymore